CG-WALK&WALL | NON-SLIP FLOOR VINYL | 12MIL
- Fabric backing adds dimensional stability
- Non-skid face film means NO lamination required!
- Repositionable and no adhesive residue.
- Slip resistant & Fire resistant
- Universal printability: UV-curable, Solvent, Eco-Solvent, Latex Inks
PanoRama Walk&Wall® is a 12mil printable, textured matte vinyl backed with fabric for dimensional stability and strength, and coated with a clear adhesive. It is the ultimate, one-step solution for floors and wall graphics! NO lamination needed - just print and apply!
Designed for short- to medium-term applications, Walk&Wall® is ideal for carpet, tile, concrete, wood and PVC floors, untreated stone, concrete block, and short- and medium-pile carpet, both indoor and outdoor.
Applications:
- Tradeshow Graphics (Concrete, Carpet & Wall Graphics)
- Point-of-Purchase (Floor & Wall Graphics)
- Sidewalk Directional Graphics
- Interior and Exterior Wall Murals/Branding
- Interior Design - Floors & Doors
Available Sizes:
- 48" x 82'
Certifications:
- Slip Resistance: ANSI A137.1/A326.3, 67212F, R12
- Fire Resistance: ASTM E84, M1, B1
| Technical Specifications | |
| Caliper (mil): | 12 |
| Liner: | Polyethylene-Coated |
| Finish: | Textured |
| Face Film: | Textured PVC |
| Back Side: | Textile |
| Adhesive: | Repositionable |
| Slip Resistance Certification: | ANSI A137.1/A326.3, 67212F, R12 |
| Fire Rating: | ASTM E84, M1, B1 |
Additional Conditions:
- Product shelf life is 1-calendar year from date of purchase.
- Clean Removability with No Adhesive Residue for up to 6 months - Adhesion May Increase Over Time.
- Interior Durability: Up to 3 Years on Vertical Surfaces; Up to 3 Months on Flooring Surfaces (Dependent on Traffic)
- Exterior Durability: Up to 1 Year on Vertical Surfaces; Up to 3 Months on Flooring Surfaces (Dependent on Traffic)
Application & Removal:
- Application Temperature is +5°F to +86°F (-15°C to +30°C)
- Service Temperature range is +0°F to +122°F (-17°C to +50°C)
- Removal Temperature is +50°F (+10°C) or Greater
- Exclusions: NOT To Be Applied On Fresh Paint, Polycarbonate, and Some PVC (No Exhaustive List Available)
- Surface must be clean and dry. For best results, apply with a hard rubber roller to ensure adequate adhesion. Rounding corners helps prevent edge lift.
- For full installation and removal recommendations, please refer to “Walk&Wall® Installation, Cleaning & Removal Recommendations”.