• Home
  • DTF- COLOR PRIME HOT MELT BLACK POWDER | 1KG.

DTF- COLOR PRIME HOT MELT BLACK POWDER | 1KG.

Black Hot Melt Direct To Film Adhesive Powder

Formulated for use during Direct to Film (DTG Transfer) printing, Color Prime adhesive powder is a crucial part of any DTF printing workflow. Cover your Direct to Film media with this powder to allow for optimal press. Use for 100% cotton, polyester, nylon, and more!


Why use Black Powder instead of White Powder?

Black DTF powder is great to use on low quality dark or black polyester or poly-blended shirts, to block dye-migration which can occur with these polyester shirts. Otherwise there is no big difference between the two colored powders.

Instructions:

(For Use With DTF Station Warm Peel Film):


  1. Print the image onto the matte side of film in mirror mode. (CMYK>>White Ink)
  2. Apply hot melt powder evenly and remove the excess powder. Use a Seismo Shaker unit - like the Seismo S20 - to apply powder with ease!
  3. Hover with a heat press to bake the hot melt powder (340°F, 5min). Or use a curing oven (300-315 °F, 1min).
  4. Transfer the image by heat press at 330°F for 15sec with medium pressure.
  5. After the first press,
  6. Option 1: Wait for 4-6 seconds and remove the film gently
  7. Option 2: Rub the top surface with a cloth to remove some heat and peel off the film gently
  8. Heat press again at 330°F 5-10sec with medium pressure to enhance softer hand feel.


SKU: DTF-COLOR PRIME HOT MELT POWDER BLACK 1KG