DTF- COLOR PRIME HOT MELT POWDER | 1KG

(0)No Reviews yet

Hot Melt Direct to Film Adhesive Powder

Formulated for use during Direct to Film (DTG Transfer) printing, Color Prime adhesive powder is a crucial part of any DTF printing workflow. Cover your Direct to Film media with this powder to allow for optimal press. Use for 100% cotton, polyester, nylon, and more!


Features:

  • After baking the powder, solid white for more vibrant colors
  • Even and regular particles for quality graphics and good adherence


Instructions:

(For use with DTF Station Warm Peel film):


  1. Print the image onto the matte side of film in mirror mode. (CMYK>>White Ink)
  2. Apply hot melt powder evenly and remove the excess powder. Use a Seismo Shaker unit - like the Seismo S20 - to apply powder with ease!
  3. Hover with a heat press to bake the hot melt powder (340°F, 5min). Or use a curing oven (300-315 °F, 1min).
  4. Transfer the image by heat press at 330°F for 15sec with medium pressure.
  5. After the first press,
  6. Option 1: Wait for 4-6 seconds and remove the film gently
  7. Option 2: Rub the top surface with a cloth to remove some heat and peel off the film gently
  8. Heat press again at 330°F 5-10sec with medium pressure to enhance softer hand feel.


SKU: DTF-COLOR PRIME HOT MELT POWDER WHT. 1KG
Back

Ratings & Reviews

No reviews available

Be the first to Write a Review